CONSPICUITY TREATMENT
MANDATORY REQURIMENTS
Other markings indicate other lighting requirements which are
not detailed on this page.
|
 |
13 - REAR UPPER BODY MARKINGS
Rear upper corners of cab facing rearward,
Exactly two pairs of 300mm long strips
Colour: White
14 - REAR MARKINGS
Rear facing rearward, on fenders, mud flap brackets, or within 300mm below top of flaps.
Exactly two sections of min. 600 mm each
Colour: Red/White |
 |
13 - REAR UPPER BODY MARKINGS
Rear upper corners of cab facing rearward,
Exactly two pairs of 300mm long strips
Colour: White
14 - REAR MARKINGS
Rear facing rearward, on fenders, mud flap brackets, or within 300mm below top of flaps.
Exactly two sections of min. 600 mm each
Colour: Red/White |
 |
13 - REAR UPPER BODY MARKINGS
Rear upper corners of cab facing rearward,
Exactly two pairs of 300mm long strips
Colour: White
14 - REAR MARKINGS
Rear facing rearward, on fenders, mud flap brackets, or within 300mm below top of flaps.
Exactly two sections of min. 600 mm each
Colour: Red/White |
 |
13 - REAR UPPER BODY MARKINGS
Rear upper corners of cab facing rearward,
Exactly two pairs of 300mm long strips
Colour: White
14 - REAR MARKINGS
Rear facing rearward, on fenders, mud flap brackets, or within 300mm below top of flaps.
Exactly two sections of min. 600 mm each
Colour: Red/White |
 |
9 - Rear Upper Body Markings
On the rear upper corners facing rearward,
Exactly 2 pairs of 300 mm long strips
Colour: White
10 - Bumper Bar Marking
On the rear bumper bar's horizontal element facing rearward, one continuous strip
Colour: Red/White
11 - Rear Lower Body Marking
On the rear full width of the vehicle facing rearward, one continuous strip
Colour: Red/White
12 - Side Marking
Each side - facing outwards, continuous or evenly spaced over a minimum of 50% of the length. Starts and ends as close to the front and rear of the vehicle as practicable
Colour: Red/White |
 |
 |
9 - Rear Upper Body Markings
On the rear upper corners facing rearward,
Exactly 2 pairs of 300 mm long strips
Colour: White
10 - Bumper Bar Marking
On the rear bumper bar's horizontal element facing rearward, one continuous strip
Colour: Red/White
11 - Rear Lower Body Marking
On the rear full width of the vehicle facing rearward, one continuous strip
Colour: Red/White
12 - Side Marking
Each side - facing outwards, continuous or evenly spaced over a minimum of 50% of the length. Starts and ends as close to the front and rear of the vehicle as practicable
Colour: Red/White |
 |
Current as of Spring 2008. This is for your reference purposes only. Errors and omissions exempt. Subject to change without notice. |
